Arsenic

Profine® Arsenic Line

PROFINE® ARSENIC removes arsenic concetration. Selective arsenic resin and last phase of filtration obtained with Profine® Carbon Block technology mixed with silver ions with a filtration of 0.5 microns for bacteriostatic action.
Use for the removal of arsenic from drinking water with a concentration of 50 µg/l.

  • REMOVES BAD ODOURS AND OFF-TASTES
  • BACTERIOSTATIC FEATURE
  • REDUCE ARSENIC CONCENTRATION


Filter for removing arsenic

PROFINE® ARSENIC is suitable for drinking water that exceeds the Arsenic (III and V type) concentration limit (10 μg/l). 

The cartridge must be mounted in a vertical position. R head is required.

TECHNICAL SPECIFICATIONS

SMALL MEDIUM LARGE
Maximum flow rate 1 l/min * 1,5 l/min * 2 l/min *
Capacity 10.000 l * 15.000 l * 20.000 l *
Working pressure Min. 2 – Max. 6 Bar Min. 2 – Max. 6 Bar Min. 2 – Max. 6 Bar
Temperature Min. 4 Max. 30°C
(40-86°F)
Min. 4 Max. 30°C
(40-86°F)
Min. 4 Max. 30°C
(40-86°F)
Flow rates and autonomy calculated with concentrations of 50 μg / l of arsenic. Exchange capacities
may vary based on arsenic concentrations of incoming water and flow rates.

DIMENSIONS

SMALL MEDIUM LARGE
DIAMETER 87,4 mm 87,4 mm 87,4 mm
HEIGHT (without head) 269 mm 384 mm 529 mm
HEIGHT (with head) 300 mm 420 mm 560 mm



Domestic filtration kit that reduces arsenic

KIT PROFINE® ARSENIC is suitable for drinking water that exceeds the Arsenic concentration
limit (III and V type). Quick connection filter with resin filter for absorbing arsenic. The resin meets
NSF 61 and WRAS standards; the rest of the components that come into contact with water that comply with Ministerial Decree 174/2004. Installation kit, tap and digital liter counter kit with fittings included.

TECHNICAL SPECIFICATIONS

SMALL MEDIUM
Maximum flow rate 1 l/min* 1,5 l/min*
Capacity 10.000 l * 15.000 l *
Working pressure Min. 2 – Max. 6 Bar Min. 2 – Max. 6 Bar
Temperature Min. 4 Max. 30°C
(40-86°F)
Min. 4 Max. 30°C
(40-86°F)
* Depending on the quality of the incoming water flow rates can vary considerably

DIMENSIONS

KIT SMALL KIT MEDIUM
DIAMETER 87,4 mm 87,4 mm
HEIGHT (without head) 269 mm 384 mm
HEIGHT (with head) 300 mm 420 mm



Microfiltration and arsenic removal in drinking water

BIG PROFINE® ARSENIC  is part of a wide range of Profine® products tested and designed to meet all needs. It is ideal in professional use where large quantities of refined water are necessary.
The cartridge must be installed in vertical position.
Use only in-out 3/8” female connection.

CONDITIONING VALVE

The process of activating the water filters consists of an initial start-up phase called Conditioning. Conditioning is an initial filter rinsing process required to ensure ideal operating conditions for the filter. This initial rinse guarantees the complete cleansing of all the inner filtering devices and the circuit itself. Conditioning should only be carried out during the first cartridge activation. This operation may take from a few seconds to several minutes. We also recommend doing it when the filter has been idle for long periods. You can find the indications for how many litres to use for the correct conditioning in the product technical data sheets.

TECHNICAL SPECIFICATIONS

BIG 2.0 BIG 3.0 BIG 4.5 BIG 6.0
Maximum flow rate 2,2 l/min * 3,3 l/min * 5 l/min * 6,5 l/min *
Capacity 22.000 l * 33.000 l * 49.500 l * 66.000 l *
Working pressure Min. 2 – Max. 6 Bar Min. 2 – Max. 6 Bar Min. 2 – Max. 6 Bar Min. 2 – Max. 6 Bar
Temperature Min. 4 Max. 30°C
(40-86°F)
Min. 4 Max. 30°C
(40-86°F)
Min. 4 Max. 30°C
(40-86°F)
Min. 4 Max. 30°C
(40-86°F)
Flow rates and autonomy calculated with concentrations of 50 μg / l of arsenic.
*Based on manufacturer‘s internal tests

DIMENSIONS

BIG 2.0 BIG 3.0 BIG 4.5 BIG 6.0
WIDTH 140 mm 140 mm 180 mm 180 mm
DEPTH 140 mm 140 mm 177 mm 175 mm
HEIGHT 330 mm 407 mm 415 mm 480 mm
We recommend replacing the cartridge at the end of its nominal range, or if the output flow ate is
too slow. It’s better that you replace the cartridge within 365 days of its installation. Before removing
the cartridge, close the upstream water inlet and eliminate the pressure in the circuit by opening the
downstream tap. To activate the cartridge correctly, open the inlet valve and supply water for at least
five minutes before drinking it.