Arsenic

arsenic

Profine® filter cartridge

 

The  Arsenic Free system combines compactness and high technology. With a simple and quick installation, it is extremely efficient in removing arsenic to the point of usable water. Its special formulation is absolutely selective against arsenic in its various forms. The performance of the Profine Arsenic Free cartridge is not affected by other unwanted substances; arsenic, once removed, will no longer be released in any way, thus ensuring the highest quality of service. With the Arsenic Free system, chlorine-compounds, tastes and odours are also removed from drinking water.

Profine ArsenicWater, filtration and taste & odor removal

PROFINE® ARSENIC is suitable for drinking water that exceeds the Arsenic concentration limit (III and V type). This is a quick-connect cartridge with resin filter for absorbing arsenic. The resin meets NSF 61 and WRAS standards; the rest of the components that come into contact with water meet the relative drinking water requirements. Usable at point

of use for the removal of arsenic from water with a concentration of 10 μg/l max.

slide_cucine_arsenic

TECHNICAL SPECIFICATIONS

SMALL MEDIUM LARGE
Functional flow rate 1 l/min* 1,5 l/min* 2 l/mi*
Capacity 9.000 l * 13.500 l * 20.000 l *
Working pressure Min. 29 – Max. 87 Psi Min. 29 – Max. 87 Psi Min. 29 – Max. 87 Psi
Temperature Min. 4 Max. 30°C

(39-86°F)

Min. 4 Max. 30°C

(39-86°F)

Min. 4 Max. 30°C

(39-86°F)

Installation: upright. R head is required.

* Depending on the quality of the incoming water flow rates can vary considerably

WARNING: use in accordance with the directions.

DIMENSIONS

External diameter: 87.4 mm

Small cartridge high: 269 mm

Medium cartridge high: 384 mm

Large cartridge high: 529 mm

DISPOSE OF THE SPENT CARTRIDGE RESPONSIBILY

Dispose the exhausted cartridge in compliance with Decision 2000/532/CE (code 15 02 03 EWC)

CARTRIDGE REPLACEMENT INSTRUCTIONS

1

Close the water inlet valve and open the outlet valve.

2

Turn the cartridge a ¼ turn to the left and pull it out.

3

Remove the cap seal and moisten the O-rings with water. Push the cartridge up and turn it a ¼ turn to the right.

4

Open the water inlet valve and allow the water to run for 5 minutes before taking any.